Urban Green Cover & Heat Risk Assessment: Geneva-region

Yaragarla, Ramkumar

Observation Metadata

Satellite Platform	Sentinel-2B (Sentinel 2)
Observation Date	2026-04-11
Cloud Cover	27.528214%
Spectral Bands Used	B04 (Red), B08 (NIR), B11 (SWIR1), B12 (SWIR2)
Processing Date	2026-04-18

Sentinel-2 satellite preview of Geneva-region, captured on 2026-04-11 from an altitude of approximately 786 km.

Statement of Problem

Rapid urbanization and climate change are placing unprecedented stress on cities worldwide. As built-up areas expand and green spaces decline, urban heat islands intensify, air quality deteriorates, and residents face increased health risks. Understanding the spatial distribution of vegetation and development is essential for evidence-based urban planning, climate adaptation, and public health protection. This analysis quantifies the current balance between green cover and built-up surfaces in Geneva-region, identifies thermal vulnerability hotspots, and provides actionable recommendations for enhancing urban forestry and green infrastructure.

1. Urban Forestry Assessment: Current Vegetation & Built-Up Status

1.1 Vegetation Distribution (NDVI Analysis)

The analysis of NDVI statistics for the Geneva-region reveals a mean NDVI value of 0.197, indicating a relatively low level of green cover. The median value of 0.187 suggests that a majority of the region's vegetation cover is modest. With a standard deviation of 0.129, there is considerable variability in vegetation cover across the region. Spatially, areas with higher NDVI values are scattered and not contiguous, as depicted in the NDVI color and greyscale maps. These patterns imply that while there are pockets of dense vegetation, much of the region has sparse green cover, which could impact local biodiversity and microclimates. The low NDVI values are particularly concerning for urban areas where green spaces are crucial for mitigating heat and improving air quality.

1.2 Built-Up Intensity (NDBI Analysis)

The NDBI statistics for the Geneva-region show a mean value of -0.095, reflecting a relatively low level of built-up intensity across the region. However, the minimum value of -1.0 and maximum of 0.306 indicate significant variability, with some areas experiencing high urbanization. High NDBI values are concentrated in specific zones, as evidenced by the NDBI maps, suggesting intense development pressure in those areas. These high built-up zones are likely to experience greater heat retention and reduced green spaces, contributing to the urban heat island effect. The negative NDBI mean value overall suggests that, while there are areas of significant development, much of the region remains less urbanized, offering opportunities for green space integration.

NDVI Color Visualization

NDVI Greyscale (Index Values)

NDBI Color Visualization

NDBI Greyscale (Index Values)

Additional Vegetation & Water Indices

Beyond NDVI and NDBI, three complementary indices provide deeper insights into vegetation health and water presence:

EVI (Enhanced Vegetation Index)

EVI improves on NDVI by correcting for atmospheric conditions and canopy background noise. It is more sensitive in areas with dense vegetation, making it useful for monitoring forest health and identifying vegetation stress that NDVI might miss.

EVI Color Visualization

EVI Greyscale (Index Values)

MNDWI (Modified Normalized Difference Water Index)

MNDWI enhances water body detection by using green and shortwave infrared bands. It is more effective than NDWI at separating water features from built-up areas, making it ideal for mapping urban water bodies like lakes, rivers, and reservoirs.

MNDWI Color Visualization

MNDWI Greyscale (Index Values)

NDMI (Normalized Difference Moisture Index)

NDMI measures vegetation water content by comparing near-infrared and shortwave infrared reflectance. Higher values indicate well-hydrated vegetation, while lower values suggest drought stress. This index is valuable for assessing irrigation effectiveness and identifying areas at risk of vegetation die-off.

NDMI Color Visualization

NDMI Greyscale (Index Values)

2. Vegetation-Development Balance Analysis

2.1 NDVI-NDBI Difference Analysis

The NDVI-NDBI difference analysis provides a nuanced view of the balance between vegetation and built-up areas in the Geneva-region. The difference bins data show that 93.20% of the region falls into the highest bin (1.077 to 1.463), indicating a strong dominance of vegetation over built-up areas. Conversely, only 0.45% of the region shows a negative difference, suggesting minimal areas where built-up intensity surpasses vegetation cover. This is visually represented in the difference map, where green zones signify vegetation dominance and red zones indicate built-up dominance. The predominance of green in the map underscores the region's overall vegetation cover, though the presence of red zones highlights areas under development pressure. Understanding these patterns is crucial for urban planning and ensuring sustainable growth.

2.2 Overlay Interpretation

The combined NDVI-NDBI overlay image offers a comprehensive view of how vegetation and built-up areas coexist in the Geneva-region. Patterns emerge where high NDVI values (green areas) are juxtaposed with low NDBI values (blue areas), indicating zones with abundant vegetation and minimal urbanization. Conversely, areas with low NDVI and high NDBI values show intense urbanization with sparse vegetation. This overlay helps identify critical areas where green spaces are either thriving or lacking, guiding targeted urban planning and conservation efforts.

NDVI-NDBI Difference Map (Green = vegetation-dominated; Red = built-up-dominated)

Combined NDVI-NDBI Overlay

3. Urban Heat Island Risk & Thermal Vulnerability

3.1 Heat Risk Distribution

Analyzing the heat index bins JSON data reveals the spatial distribution of heat risk zones in the Geneva-region. The majority of the region, 93.32%, falls into the lowest heat risk category, indicating minimal urban heat island effect in these areas. However, 0.33% of the region is classified in the highest heat risk category, where built-up intensity significantly exceeds vegetation cover. These high-risk zones are likely to experience elevated temperatures, posing challenges for public health and urban comfort. The heat index map and legend help visualize these zones, highlighting the need for targeted interventions in areas most affected by heat. Understanding these patterns is essential for developing strategies to mitigate urban heat and enhance livability.

3.2 Key Findings & Implications

Total green cover percentage: 23.31%
Vegetation health score: 0.375
Green infrastructure score: 0.385
Ecological balance score: 2331.486

Urban Heat Index Map (Red = high risk zones)

4. Strategic Recommendations for Green Infrastructure

4.1 What's Working Well

The relatively high green infrastructure score of 0.385 indicates successful integration of green spaces in some areas of the Geneva-region.
The low mean NDBI value of -0.095 suggests that much of the region remains less urbanized, offering opportunities for preserving and expanding green spaces.

4.2 Critical Challenges

The low vegetation health score of 0.375 highlights the need for improved management and maintenance of existing green spaces to enhance their ecological function.
The presence of high heat risk zones, though minimal, underscores the vulnerability of certain areas to urban heat island effects and the need for targeted cooling strategies.

4.3 Evidence-Based Recommendations

Implement targeted greening projects in high heat risk zones to mitigate urban heat and improve air quality.
Enhance maintenance and management practices for existing green spaces to improve their health and ecological benefits.
Incorporate green infrastructure in urban planning to ensure sustainable development and preserve natural ecosystems in the Geneva-region.

Analysis Coverage Area

The interactive map below shows the exact geographical bounds of this satellite analysis. The colored overlay represents the NDVI coverage area overlaid on OpenStreetMap. You can zoom and pan to explore how the analysis boundaries align with streets, neighborhoods, and landmarks in Geneva-region.

Note: The analysis boundaries may extend beyond administrative city limits as they represent the satellite image crop captured on 2026-04-11. This ensures complete coverage of the urban area and surrounding regions for comprehensive vegetation and heat risk assessment.

Why Urban Green Cover Matters

Urban forests and green spaces are critical infrastructure for healthy, livable cities. Trees and vegetation reduce air pollution, lower urban temperatures through shade and evapotranspiration, manage stormwater, support biodiversity, and improve mental health and well-being. As cities grow denser and climate change intensifies heat events, monitoring and protecting urban green cover becomes essential for public health and environmental resilience.

Satellite remote sensing provides objective, repeatable measurements of vegetation health and urban development patterns across entire metropolitan areas. The Normalized Difference Vegetation Index (NDVI) quantifies photosynthetic activity and green cover, while the Normalized Difference Built-up Index (NDBI) identifies impervious surfaces and development intensity. Together, these indices reveal the changing balance between nature and urban growth—and highlight where intervention is most needed.

Understanding NDVI and NDBI

NDVI (Normalized Difference Vegetation Index) measures the difference between near-infrared light (strongly reflected by healthy vegetation) and red light (absorbed by chlorophyll). Values range from -1 to +1, with higher values indicating denser, healthier vegetation. Typical ranges: 0.6-0.9 = dense forest; 0.3-0.6 = moderate vegetation; 0.1-0.3 = sparse vegetation; <0.1 = bare soil or built-up areas.

NDBI (Normalized Difference Built-up Index) uses shortwave infrared and near-infrared bands to identify constructed surfaces. Positive values indicate built-up areas (roads, buildings, concrete), while negative values suggest natural or vegetated land. When NDBI exceeds NDVI in an area, it signals high development intensity and elevated urban heat island risk.

README Note

Our Mission: We want this research dataset brief to be Simple, Authentic, and Repeatable.

1. Title of the Dataset

Urban Green Cover and Heat Risk Assessment

2. What This Dataset Is About

This dataset was created to help anyone understand how vegetation and green cover in this region is changing over time. It brings together processed satellite data, simple calculations, and a few observations that give the bigger picture.

3. Why This Dataset Matters

At I Hug Trees, we believe that Geospatial Satellite imagery and processed data should be accessible to everyone. While grounded in scientific principles, outputs are presented in accessible formats so that technical imagery and calculations resonate with ordinary people and communities. Because only when it is relatable, can it tell clear stories about our greenery and urban life: shaping how we live, how we breathe, and how we cope with rising heat.

This dataset tries to make that easier. Whether you are a researcher, policy maker, student or just curious about the environment, these numbers and images help you see trends that are not obvious at first glance.

4. Source of the Data

Satellite: Sentinel-2
Provider: Microsoft Planetary Computer
Acquisition Window: Past 60 days (filtered by cloud cover)
Cloud Cover Threshold: < 30%
Initial Tile Discovery: Copernicus Data Space Ecosystem browser

5. How the Data Was Processed

Basic Preprocessing:

It is important to get the right tile from the Sentinel-2 database for imagery processing. The browser feature from the Copernicus Data Space Ecosystem helped us identify the correct tile, its bounds, and the subset coordinates needed for extraction. It is always essential to double-check the preview image to verify that the fetched tile truly corresponds to the target region.

Next, we used an AWS Lambda environment for the bounds-discovery phase. This step involved fetching band data from the Microsoft Planetary Computer for dates where cloud cover was below 30% within the past 60 days. Once the acquisition date met this condition, we moved to AWS EC2 server scripts written in Python to download raw band data and process them into COGs (Cloud Optimised GeoTIFFs) along with additional indices.

These processed COGs and index outputs are then used for image displays, NDVI interpretation, and HTML digest features published on our platform. All indices raw value outputs are in JSON files for easy repeatable processing. We currently run this workflow on a quarterly schedule for each identified region.

Cloud Masking:

This dataset uses Sentinel-2's Scene Classification Layer (SCL) to remove pixels affected by clouds, shadows, haze, and saturation. Only surface-clear classes are kept, ensuring that the vegetation indices are calculated from clean, reliable pixels. The masking is applied at the pixel level, meaning every index (NDVI, EVI, etc.) is computed only on valid areas after stripping away noisy regions. This results in more trustworthy COGs, cleaner previews, and more meaningful temporal comparisons.

Calculation Formulas Used:

NDVI = (NIR − Red) ÷ (NIR + Red)
EVI = 2.5 × (NIR − Red) ÷ (NIR + 6×Red − 7.5×Blue + 1)
NDWI = (Green − NIR) ÷ (Green + NIR)
NDBI = (SWIR1 − NIR) ÷ (SWIR1 + NIR)

Tools Used:

Data Source: Microsoft Planetary Computer (Sentinel-2 L2A), rasterio, GDAL
Computation: Python 3, NumPy, SciPy, Pillow, Rasterio, rio-cogeo
AWS Pipeline: Lambda (triggers), EC2 (processing), S3 (storage), Bedrock (AI summaries)
Mapping: Leaflet.js, tile layers served from S3
Automation: Python boto3, Cron (EC2 quarterly jobs)

6. File Contents

The dataset includes metadata.json with satellite tile information, various index outputs (NDVI, EVI, NDWI, NDBI, MNDWI, NDMI), and statistical summaries. Please find the detailed list of files available for download in the Download Data & Maps section below.

7. How to Use This Dataset

You can explore the NDVI trends, plug the json file into your favourite tool, build visualisations, or compare it with earlier datasets. It's created to be flexible.

8. Leveraging AI

AI helped speed up some parts of the work, like spotting unusual patterns, creating brief insights, and checking for inconsistencies. All metadata and bin-statistics JSON files were loaded and parsed into structured dictionaries, ensuring the AI receives clean, context-rich inputs for stable summarisation and interpretation.

9. Limitations & Things to Keep in Mind

Cloud cover may affect accuracy
NDVI has known limitations
Spatial resolution is 10 meters
Some patterns may need ground truth validation

10. License / Permissions

Please refer to the How to Cite This Analysis section below for citation guidelines. This dataset is licensed under Creative Commons Attribution 4.0 International (CC BY 4.0).

11. Contact

For any questions, collaborations, or clarifications, feel free to reach out at: nature@ihugtrees.org

Data & Methods

Data Sources

Satellite: Sentinel-2B Level-2A (atmospherically corrected)
Provider: Microsoft Planetary Computer
Observation Date: 2026-04-11
Cloud Cover: 27.528214%
Spatial Resolution: 10 meters (NDVI), 20 meters (NDBI, resampled to 10m)

Index Calculations

NDVI = (NIR - Red) / (NIR + Red) using Bands 8 and 4
NDBI = (SWIR1 - NIR) / (SWIR1 + NIR) using Bands 11 and 8
Difference Index = NDVI - NDBI (positive = vegetation-dominated; negative = built-up-dominated)
Urban Heat Index = Composite metric flagging areas where NDBI > NDVI (high heat risk)

Processing Workflow

Images were processed using Python with the pystac-client and rasterio libraries. Cloud masking was applied using the QA60 scene classification layer. Statistics were computed using rasterio zonal statistics and exported as JSON for analysis. All geospatial outputs are provided as Cloud-Optimized GeoTIFFs (COGs) for efficient web access and GIS integration.

Limitations

Analysis represents a single-day snapshot; seasonal and temporal trends require time-series analysis
Cloud cover and atmospheric conditions affect image quality
10-meter resolution may not capture individual trees or small green spaces
Study area boundaries reflect the satellite image crop, not administrative city limits
Heat risk is inferred from spectral indices; ground validation recommended for mitigation planning

Download Data & Maps

Images & Visualizations

Geospatial Data (Cloud-Optimized GeoTIFFs)

Statistical Data

How to Cite This Analysis

Recommended Citation

Yaragarla, R. (2026). Urban Green Cover & Heat Risk Assessment: Geneva-region. I Hug Trees. Retrieved from https://ihugtrees.org/data-analytics/sentinel-ndvi/Geneva-region/2026/04/18/digest.html

Satellite data: Copernicus Sentinel-2 (ESA), processed via Microsoft Planetary Computer.

BibTeX Entry

@misc{ihugtrees_urban_geneva-region_2026,
  author = {Yaragarla, Ramkumar},
  title = {Urban Green Cover \& Heat Risk Assessment: Geneva-region},
  year = {2026},
  publisher = {I Hug Trees},
  url = {https://ihugtrees.org/data-analytics/sentinel-ndvi/Geneva-region/2026/04/18/digest.html},
  note = {Satellite data: Copernicus Sentinel-2}
}

License

This analysis and associated datasets are licensed under Creative Commons Attribution 4.0 International (CC BY 4.0). You are free to share and adapt this work with appropriate attribution.

Planetary Computer Citation

If using Microsoft Planetary Computer data, please cite: microsoft/PlanetaryComputer (2022)

Urban Green Cover & Heat Risk Assessment: Geneva-region A Research Brief on Urban Forestry Data